Automatic Canned Fresh Air Filling Machine With PLC Control System
Vacuum Crimping Part Description
- The crimping head is mainly used to seal on the corrected and
pressed valve with internal expanding mode. It needs to finish two
- Firstly, the pressure cylinder presses valves on the opening to
make the valve rubber gasket flatten against the opening,usually
the compression is 0.2-0.3mm.
- Then, the pressure cylinder sends a signal to inform sealing
cylinder to operate. The capper is fast, reliable, steady and easy
to adjust sealed diameter and sealed depth manually without any
Gas Filling Part Description
- Two gas filling stations are composed by two independent filling
machines. Gas filling machine has fully absorbed the advanced
filling machine technology from the Swiss Pamasol Company. So as to
accelerate filling speed and accurate measuring.
- The measuring cylinder of inflator is made of 304 stainless steel
materials. The processing techniques and precision are the same as
the measuring cylinder of filling liquid machine.
- The seal rings of inflator adopt CFRP skeleton rings of
tetrafluoroethylene produced by American, which located in U-groove
with stainless steel reeds inside.
- When seal rings are normally worn in long-term operation, the outer
diameter of seal rings will automatically compensate due to the
function of reeds.
300-400cans/hr (one gas filler)
600-800cans/hr (two gas fillers)
|Applicable can diameter||35-80mm|
|Applicable can Height||60-350mm|
|Vacuum degree||-0.05Mpa (tin can)|
|Gas filling speed||600-800/hour/nozzle|
|Max gas filling volume|
Max 750ml (take water for example)
Max 20L (take compressed air for example)
|Max air consumption||1.2 m³/min|
|Applicable Gas||Oxygen, compressed air, nitrogen, CO2 (Oil-free)|