Pneumatic Aerosol Can Bag On Valve Filling Machine Semi Automatic
BOV Filling Machines
1 Bag On Valve Aerosol Filling Machine is specifically designed for
bag on vavle aerosol products filling, it is PLC controlled with a
frendly touch screen interface, comparing with previous pneumatic
control one, this version is improved a lot in efficiency,
intelligence, parameters setting, process supvision and trouble
2 There are two heads seated on the working table, the first head
combines the function of vacuumizing, prppellant filling and
criimping, more economic propellants are optional for customer such
as N2, CO2, Air or even comperssed air.
3 The second head is aiming to charge the liquid material into bag
through the valve, since material is insolated into bag and will
not touch propellant, thus this machine is widely used for
pharmaceutical, food, cosmetic and other bag on valve products
manufacturing. And there is no any limitration about water base,
oil base or alcohol based liquid.
4 Liquid material will be filled into inside of bag, entirely
separate from can body, which prevents the trouble of the can leak
due to raw material corrosion.
5 BOV propellants are N2 or compressed air, safe and clean. When
operation, valve will be open and make compressed air in the can to
force the raw material out of bag. When raw material is fully
ejected, compressed air still retains in the can and then be used
for repeated filling.
|Crimping&gas filling capacity||600-1000cans/hour|
|Liquid Filling capacity||600-1000cans/hour|
|Liquid filling volume||Max 250ml|
|Max air consumption||0.8cbm/min at pressure 0.7MPa|
|Propellant||N2, CO2, compressed air|