Can arranging machine has nine flat-roofed stainless conveyor belts, it is used to
automatically arrange cans and feed the filling line on the
stainless conveyor belt, can load 200-400 pcs cans. It is equipped
with an explosion-proof motor and switch.
Valve inserting machine consists of a valve arranging turntable, a valve blowing part and
a valve inserting part. Putting valves into the rotation manually.
In the rotation, the valves are thrown into the slot, then through
the blowing part the valves come to the inserting part.
Vacuum crimping and gas filling machine:
in last step, the valve was inserted into the can, but normally the
valves will jump out of the can opening and be away from the
opening center, then here is the valve correcting device, it is
used to correct valves, make it straight, set it right and press it
into can opening, like this.
After this, there is crimping machine, it is used to seal the valve
with internal expanding mode.
Then three gas fillers, the gas will also be filled 3 times equally
into an aerosol can. Behind the gas fillers, there are three gas
metering cylinders, upper one is a piston cylinder, below one is
for containing propellant gases, such as LPG, butane, propane, or
Automatic water bath leakage testing machine is used to test if there is any air leakage for the finished
product. It puts gas filled products into water tanks automatically
and control the water temperature at 55 degree centigrade by
electrical heating or steam heating for 3 minutes. If no bubbling
in the warm water after 3 minutes, in general, the aerosol products
will not leak within two years.
Actuator pressing machine is used to press the actuators, it consists of vibrating plate,
actuator presser, and a rotary table. During Vibration the
actuators come down to the cans, and then be pressed here by the
actuator presser, through the rotary table, cans continue to move
Packing table automatic aerosol filling line usually uses stainless conveyor
belts with 13.5m, including this packing table with 2.5m. At here,
just take the finished aerosol cans to your cartons. The packing
table is also equipped with an explosion-proof motor.