Vacuum Crimping And Oxygen Gas Filling Machines
Equipment Brief instruction
A. CJXH-1600DT is with microcomputer (PLC) programmable control,
photoeltricity sensing. It consisted of one set vacuum crimping
machine & two sets gas fillers. Using the screw bottles pusher
instead of manual work.
B. It has two working modes: manually intermittent filling and
automatic intermittent filling, intermittent time is adjustable,
very flexible and efficient. Manually inserting the valve before
Vacuum Crimping Part Description
The crimping head is mainly used to seal on the corrected and
pressed valve with internal expanding mode. It needs to finish two
steps respectively. Firstly, the pressure cylinder presses valves
on the opening to make the valve rubber gasket flatten against the
opening,usually the compression is 0.2-0.3mm. Then, the pressure
cylinder sends a signal to inform sealing cylinder to operate. The
capper is fast, reliable, steady and easy to adjust sealed diameter
and sealed depth manually without any tool.
Gas Filling Part Description
1. Two gas filling stations are composed by two independent filling
machines. Gas filling machine has fully absorbed the advanced
filling machine technology from the Swiss Pamasol Company. So as to
accelerate filling speed and accurate measuring.
2. The measuring cylinder of inflator is made of 304 stainless
steel materials. The processing techniques and precision are the
same as the measuring cylinder of filling liquid machine.
3. The seal rings of inflator adopt CFRP skeleton rings of
tetrafluoroethylene produced by American, which located in U-groove
with stainless steel reeds inside.
4. When seal rings are normally worn in long-term operation, the
outer diameter of seal rings will automatically compensate due to
the function of reeds.
300-400cans/hr (one gas filler)
600-800cans/hr (two gas fillers)
|Applicable can diameter||35-80mm|
|Applicable can Height||60-350mm|
|Vacuum degree||-0.05Mpa (tin can)|
|Gas filling speed||600-800/hour/nozzle|
|Max gas filling volume|
Max 750ml (take water for example)
Max 20L (take compressed air for example)
|Max air consumption||1.2 m³/min|
|Applicable Gas||Oxygen, compressed air, nitrogen, CO2 (Oil-free)|